How do I get into BIOS Packard Bell?

How do I get to the boot menu on Packard Bell?

During startup, press F12 to open the boot menu.

How do I enter BIOS on HP?

Access the BIOS Setup Utility using a series of key presses during the boot process.

  1. Turn off the computer and wait five seconds.
  2. Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.
  3. Press f10 to open the BIOS Setup Utility.

How do I enter BIOS on Windows 10?

To enter BIOS from Windows 10

  1. Click –> Settings or click New notifications. …
  2. Click Update & security.
  3. Click Recovery, then Restart now.
  4. The Options menu will be seen after executing the above procedures. …
  5. Select Advanced options.
  6. Click UEFI Firmware Settings.
  7. Choose Restart.
  8. This displays the BIOS setup utility interface.

How do I get into BIOS settings?

To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.

What is the BIOS key for Gigabyte?

When starting up the PC, press “Del” to enter BIOS setting and then press F8 to enter Dual BIOS setting.

What is the boot key for HP?

Hot keys for BootMenu / BIOS Settings

Manufacturer Type Boot Menu
DELL laptop F2
EMACHINES F12
HP generic Esc, F9
HP desktop Esc

How can I enter BIOS if F2 key is not working?

If the F2 prompt doesn’t appear on the screen, you might not know when you should press the F2 key.



  1. Go to Advanced > Boot > Boot Configuration.
  2. In the Boot Display Config pane: Enable POST Function Hotkeys Displayed. Enable Display F2 to Enter Setup.
  3. Press F10 to save and exit BIOS.

What is the main function of BIOS?

BIOS (basic input/output system) is the program a computer’s microprocessor uses to start the computer system after it is powered on. It also manages data flow between the computer’s operating system (OS) and attached devices, such as the hard disk, video adapter, keyboard, mouse and printer.

What button do I press to get into BIOS?

In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.

What is the F12 boot menu?

The F12 Boot Menu allows you to choose which device that you would like to boot the computer’s Operating System from by pressing the F12 key during the computer’s Power On Self Test, or POST process. Some notebook and netbook models have the F12 Boot Menu disabled by default.

How do I boot into BIOS without rebooting?

However, since the BIOS is a pre-boot environment, you can’t access it directly from within Windows. On some older computers (or those deliberately set to boot slowly), you can hit a function key such as F1 or F2 at power-on to enter the BIOS.

Leave a Comment

Your email address will not be published.